PSDA300-1 Fuel Quantity Interface Cable
Order Code: ACPSDA300-1

The PSDA300-1 Test Cable connects the PSD60-2R AC fuel quantity tester to the center tank or wing tanks of an A300 at the tank-wall disconnect. The operator selects any one of the individual fuel probes, the compensator, or the total tank capacitance for display on the fuel quantity tester. Similarly, the insulation resistance of in-tank wiring and probes can be measured. In addition, provision is made to connect the PSDA300-1 to a PSDA310-2 Level Sensor Tester to test the fuel level sensors from the same access point.

PSDA300-2 Fuel Quantity Interface Cable
Order Code: ACPSDA300-2

The PSDA300-2 Test Cable connects the PSD60-2R AC fuel quantity tester to the tail tank of either an A300-600 or an A310-300 at the tank-wall disconnect. The operator selects any one of 15 probes, the compensator, or the total tank capacitance for display on the fuel quantity tester. Similarly, the insulation resistance of in-tank wiring and probes can be measured.

PSDA310-1 Fuel Quantity Test Cable
Order Code: ACPSDA310-1

The PSDA310-1 Test Cable connects the PSD60-2R AC fuel quantity tester to the center tank or wing tanks of an A310-300 at the tank-wall disconnect. A separate connector adapts to the compensator connector, and short adapters are used to mate the tester "outer wing" and "center tank". The operator selects any of seven probes, the compensator, or total tank capacitance for display on the fuel quantity tester. Similarly, the insulation resistance of in-tank wiring and probes can be measured.


PSDA310-1 Fuel Quantity Test Cable
Order Code: ACPSDA310-2

The PSDA310-2 Fuel Level Sensor Tester is a battery operated, intrinsically safe tester which applies power to the fuel level sensor and displays its condition on one of four Light Emitting Diodes (LED's). The PSDA310-2 is connected to the tank-wall disconnect via the PSDA300-1 Fuel Quantity Test Cable for the A300 aircraft. The operator presses the "Press to Test" switch for three seconds and observes whether the LEDs indicate "WET" or "DRY" if the level sensor is normal, or "OPEN" or "SHORTED" if failed.

Contact us for more information on this product.