SpaceWire
Aeroflex Colorado Springs and Aeroflex Gaisler’s SpaceWire family includes a SpaceWire Physical Layer Transceiver, Node Interface IP, 4-Port Router, FPGA-based SpaceWire Router solutions and evaluation boards.
NEW - a
UT200SPW4RTR 4-Port Evaluation Board is now available.
SpaceWire is a standard governing serial communication between satellite components. Originally developed by the European Space Agency, SpaceWire marries IEEE-1355 with a LVDS physical layer.
Aeroflex also offers customers a complete SpaceWire solution - products and test equipment. Aeroflex and
4Links Limited have a test equipment distribution agreement
allowing Aeroflex to provide 4Links SpaceWire test equipment and support for North America.
For questions, please call 800-645-8862.
UT200SpW4RTR-EVB 4-Port SpaceWire Router Evaluation Board- 200Mbps on all 4 SpaceWire ports
- HOST port access through on board FPGA
- Interfaces to LEON-3FT UT699 Eval board
- On board Clock Network Manager, LVDS Drivers, and LVDS Receivers
- Configuration through any of the ports
- Path and logical addressing support
- Group adaptive routing for 2 ports
UT200SpW4RTR 4-Port SpaceWire Router - 4-port SpaceWire Router with a system interface port for a total of 5 ports
- Data rates up 200Mbps half-duplex on all 4 SpaceWire ports
- Compliant to the SpaceWire Standard
- Cold spare on all LVDS pins
- 3.3V I/O supply and 2.5V core supply
- Packaged in a 255-lead CLGA
- Q & V, 100 krad(Si), SMD 5962-08244
UT200SpWPHY01 SpaceWire Physical Layer Transceiver- 2-bit Serializer/Deserializer (SERDES) functionality
- LVDS Physical Layer
- Data rates to 200 Mbits/sec
- Data/Strobe transmit skew <400pS
- Packaged in a 28-pin CFP
- QML Q & V, 100 krads(Si), SMD 5962-06232
UT100SpW02 SpaceWire Protocol Handler IP (UT6325 Eclipse FPGA only)- Dual ECSS-E-50-12A compliant link
- Data rates from 2 to 100 Mbits/sec
- 9-bit transmit and receive FIFO user interface
- Designed for use with the RadHard Eclipse FPGA
GRSPW2 SpaceWire Link (Node Interface) IP Core-
Aeroflex Gaisler IP core
- Compliant with ECSS-E-ST-50-12C and ECSS-E-ST-50-51C
- RMAP Target compliant with ECSS-E-ST-50-52C
- Multiple DMA channels per link
- AMBA 2.0 back-end interface
- Support for external Aeroflex UT200SpWPHY01 SpaceWire Physical Layer Transceiver
- Data rates from 2 to 400 Mbps
- Available for ASIC and FPGA technologies
RT-SPW-Router-10X SpaceWire Router- Based on Aeroflex Gaisler's GRSPWROUTER IP core
- 8x SpaceWire ports
- 2x FIFO ports, casadable without glue logic
- RMAP configuration port
- Targeted to Aeroflex ASICs, Aeroflex programmed Actel RTAX2000S(L) or RT3PE3000L
- Up to 200 Mbps
RT-SPW-Router-6X SpaceWire Router with PCI- Based on Aeroflex Gaisler's GRSPWROUTER IP core
- 4x SpaceWire ports
- 2x AMBA ports with DMA and RMAP
- RMAP configuration port
- PCI Initiator/Target, 32-bit, 33 MHz
- Targeted to Aeroflex ASICs, Aeroflex programmed Actel RTAX2000S(L)
- Up to 200 Mbps
GRSPWROUTER SpaceWire Routing Switch IP Core- Aeroflex Gaisler IP core
- Compliant with ECSS-E-ST-50-12C
- Non-blocking switch-matrix
- Path, Logical and Regional Logical Addressing
- Group Adaptive Routing
- Packet Distribution
- Configuration port compliant with RMAP (ECSS-E-ST-50-52C)
- 2 - 31 ports individually configurable as SpaceWire, FIFO or AMBA ports
- Support for external Aeroflex UT200SpWPHY01 SpaceWire Physical Layer Transceiver
- Available for ASICs using the LEON3-FT
